How to Reset Canon PIXMA iP2770

1. The printer is turned OFF (Power and USB cable connected) 
2. Press and hold the RESUME button 2 seconds, then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first) 
3. Then release the RESUME button, but do not release the POWER button. 
4. While the POWER button is still depressed, press the Resume button 5 times (pause 1-2 seconds / 1 times the press). Led will light turns green orange with the last glow orange. (do not be mistaken because the printer will die 4x temporary total) 
5. Release both buttons simultaneously. 
6. Led will blink briefly and then will glow GREEN. 
7. The computer will detect new devices (the printer will detect new hardware = canon devices), please ignore .... 
8. The situation is shown in a state iP2770 printer SERVICE MODE and ready to reset.

 Download Driver Canon Pixma iP2770:
ServiceTool_1074.zip
Download Resetter Canon Pixma iP2770:
1. Windows 7, download. Windows 7 (x64), download
3. Windows Vista, download
4. Windows Vista (x64), download
5. Windows XP, download
6. Windows XP (x64), download

1. Exctract File pixma iP2770 Resetter. 
2. Prepare 2 paper in the printer (this is to print at the time of reset process). 
3. Run program iP2770 Resetter 
4. Click "PLAY", then the printer would proceed, then iP2770 will print one page with the words "D = 000.0" 
5. Click the "Clear EEPROM". 
6. Then click the "EEPROM", and the printer will print the results iP2770 Resetter. One of the writing row as follows: "TPage (TTL = 00 000)" 
7. Turn off the printer by pressing the POWER button. 
8. Done ...